ZF Repair Manual: ZF220A
<< Previous of 30 Next >>Manuale d'officina /
Workshop manual
ZF 220 A
10
66
60
15751990117
61 A - B - C - D
65
Coperchio
Cover
79
76
Fig. 15
Fig. 17
Fig. 13
Fig. 16
Fig. 18
Fig. 14
semicarcasse e disunirle (Fig. 13).
2)
Togliere dalla scatola i pacchi spessori (51-52-53-54)
e (99-100-101-102). Estrarre le coppe dei cuscinetti
(63) (66) e (79), battendo con l’attrezzo (15751990117)
sulla superficie maggiore.
3)
Estrarre gli alberi dal coperchio (Fig.14).
4)
Allentare le viti (64) con rondelle (12) e togliere il
carterino (62).
5)
Con apposito estrattore a griffe per interni, estrarre
dalla semicarcassa le coppe dei cuscinetti (60) con gli
spessori (56-57-58-59) e (66) (Fig.15).
6)
Svitare le viti (11)con rondella (27) dalla flangia (46).
Utilizzare due di queste viti, avvitare sulla flangia per
estrarla dal coperchio.
holes on the half casing and separate gearbox cover
from main housing (Fig. 13).
2)
Remove the shims set (51-52-53-54) and (99-100-101-
102) from the housing.
Remove taper roller bearings (63-66-79) outer race
by hitting on tool (15751990117) which lays on bigger
outer race diameter.
3)
Remove shafts from cover (Fig.14).
4)
Loosen screws (64) with washer (12) and remove baffle (62).
5)
By means of a suitable bearing puller drive off taper roller
bearings (60) with shims (56-57-58-59) and (66) outer
race from main housing (Fig.15).
6)
Remove the screw (11) with washer (27) from the
flange (46). Use two of these screws and screw them
down on the flange to extract it from the cover.