ZF Repair Manual: ZF45C, 63C, 88C

Repair Manual and Spare Parts List ZF 45C / 63C / 88C

3.11 Assemble the cover down over the input shaft.

NOTE:

Be sure of the correct position of the outer disc (63)

when pressing the cover against the housing.

3.12 Install screws (7, 8) with washers (10).

NOTE:

Tighten them to 18Nm (13.3 lb ft.) torque.

Tighten the screws evenly to avoid binding the housing on

the shaft.

3.13 Install the output flange (66).

NOTE:

Use LOCTITE 245 on the spline between output

shaft and output flange.

3.14 Wet O-ring (71) with grease.

3.15 Tighten the output shaft ring nut (72). Use tool P.N.

500446 and P.N. 500502.

NOTE:

Tighten

the ring nut (72) to 120Nm (88 lb ft.) torque.

3.16 Install the breather (22) using LOCTITE 574 and the

oil dipstick (26) together with O- Ring (27).