ZF Repair Manual: ZF45C, 63C, 88C

<< Previous of 45 Next >>
Repair Manual and Spare Parts List ZF 45C / 63C / 88C
16
2.8 Assemble the cover (5).
Tights bolts (6) with washer (10). Tightening torque: 18
Nm (13.3 lb ft.).
2.9 Install spool valve (24) onto front cover (35) cheking for
the correct alignement of groove.
2.10 Install stop screw (17) with washer (13) Tightening
torque: 12 Nm (8.9 lb ft.).
Install onto cover (35) ball (21), spring (20) and guide
spring (18) together with sealing washer (13).
Guide spring (18) tightening torque: 12 Nm (8.9 lb ft.).
Turn slowly spool valve (24) to centre groove to ball
(21).
NOTE:
The plug shown in the figure with the arrow, will only
be tighten if the distributor is correctly oriented.
2.5 Install O-Ring (57) into the piston (56).
Wet O-Ring with ATF oil and using a plastic hammer,
install the assembled piston (56) into cover (35).
2.6 Install the filter (3).
2.7 Install the rubber oil plate (4).