ZF Repair Manual: ZF63A, ZF63, ZF80A, ZF80-1A
<< Previous of 84 Next >>2. INTERMEDIATE SHAFT
2.1 Mounting inner races of tapered roller
bearings
Heat inner races of tapered roller bearings (item 1 and 2,
Fig. 2-1) to approx. 120 ëC (248 ëF) and push them onto
the intermediate shaft up against the shaft collar.
|
WARNING
|
Handle heated taper roller bearing inner races only
with protective gloves!
When the inner races have cooled down, drive them
carefully against the collar using a copper/brass punch.
NOTE
Apply copper/brass punch on inner race and not on
the rollers.
FIG. 2-1
3. OUTPUT SHAFT
3.1 Mounting inner race of tapered roller bearing
Heat inner races of taper roller bearings (item 1 and 2,
Fig. 3-1) to approx. 120 ëC (248ëF) and push them onto
output shaft up against shaft collar.
|
CAUTION
|
Handle heated tapered roller bearing inner races only
with protective gloves!
When the inner races have cooled down, drive them
carefully against the collar using a copper/brass
punch.
NOTE
Apply copper/brass punch on inner race and not on
the rollers.
FIG. 3-1
19
Repair Manual and Spare Parts List
Section 4: Assembly
1
2
120
Ëš
C
248
Ëš
F
120
Ëš
C
248
Ëš
F
120
Ëš
C
248
Ëš
F
120
Ëš
C
248
Ëš
F