ZF Repair Manual: ZF25A, ZF25, ZF45A, ZF45-1
<< Previous of 78 Next >>3.1.2 Suction of transmission fluid
Push hose of suction pump (item 1, Fig. 1-2) through
the suction pipe (item 2, Fig. 1-2) down to the bottom
of the housing and suck the fluid off.
3.1.3 Suction of transmission fluid on
ZF25A and ZF25
Remove the plug (item 3, fig. 1-2) and let the oil flow
from the proper hole.
+
|
IMPORTANT
|
The used oil and the oil filter are to be handled as
special waste that pollute the environment.
For the safe disposal of used oil and filter, take all
the measures required by the relevant local rules
and legislation.
3.2 DIPSTICK
Unscrew dipstick (item 1, Fig. 2-1) (counterclockwise)
and pull out of housing. Replace O-Ring if present
(check parts list section 10).
3.3 BREATHER VALVE
Unscrew breather valve (item 1, Fig. 3-1). Wash valve
in a detergent, let dry and dip in oil, then let oil drip off.
3.4 OUTPUT FLANGE
Lock output flange in swivel frame.
ZF45-1
Unscrew hex head bolt (item 1, Fig. 4-1 a).
Remove disc (item 2, Fig. 4-1 a) and O-ring (item 3, Fig.
4-1 a).
Screw hex bolt (item 1, Fig. 4-1 a) in again.
Place extractor on the transmission and pull output the
flange (item 1, Fig. 4-2) off.
10
Repair Manual and Spare Parts List
Section 3
1
2
3
FIG. 1 - 2
ZF 25 A
ZF 25
ZF 45 A
ZF 45-1
1
FIG. 2 - 1
1
FIG. 3 - 1
1
2
3
4
FIG. 4 - 1a