Mercruiser 5.0L Marine Engine Specifications
 |
 |
 |
 |
 |
 |
(5.0L V-8 Models)
|
Models |
5.0L |
5.0L EFI |
|
Propshaft Horsepower |
2201 |
2401 |
|
Propshaft Kilowatts |
1641 |
1791 |
|
Displacement |
305 cid (5.0 l) |
|
|
Maximum rpm @ WOT3 |
4400-4800 rpm |
|
|
Idle rpm in NEUTRAL3 |
650 rpm5 |
600 rpm6 |
|
Oil Pressure @ 2000 rpm |
30-60 psi (207-414 kPa) |
|
|
Min. Oil Pressure @ Idle |
4 psi (28 kPa) |
|
|
Thermostat |
160o F (71o C) |
|
|
Timing @ Idle rpm4 |
10o BTDC |
8o BTDC |
|
Firing Order |
1-8-4-3-6-5-7-2 |
|
|
Electrical System |
12-Volt Negative (-) Ground |
|
|
Alternator Rating – Hot Operating Amps |
65 Amps |
|
|
Alternator Rating – Cold Operating Amps |
72 Amps |
|
|
Recommended Battery Rating (Minimum) |
375 cca/475 mca/90 Ah |
550 cca/700 mca/120 Ah |
1 Power Rated in Accordance with NMMA (National Marine Manufacturers’ Association) rating procedures.Â
2 Power Rated in Accordance with SAV 1 rating procedures. Horsepower differences shown result from differences in test rpm, allowable test tolerances, and/or installation of special kit components.Â
3 Measured using an accurate service tachometer with engine at normal operating temperature.Â
4 A special procedure must be followed to check or adjust timing. Consult your Authorized mercury MerCruiser Dealer before attempting this procedure.Â
5 A special procedure must be followed to adjust idle rpm. Consult your Authorized Mercury MerCruiser Dealer before attempting this procedure.Â
Â
