Mercruiser Bravo 1 XR Sterndrive Replacement
Kimmo,
Thanks for your inquiry and the opportunity at earning your business. Yes we certainly ship product internationally on a daily basis, including Finland. With your rated Hp and torque being so high I actually called Mercruiser Racing to see what the best option would be. They indicated the Sportmaster would not be an option. They said the only option available is the Bravo 1 XR however it is only rated for 600 Hp. I asked them what people would normally do in your case with a higher Hp than the sterndrive rating and he said they go with the Bravo 1 XR and DON’T get into the throttle hard until after the boat is on plane. He said that the drives fail in the gear set in upper housing and will do this from excessive torque which comes when the boat is actually coming up on plane, not while it is up and running. As for the cooling system we offer the only High Performance Cooling System available on the market for this Hp (see link below). We do handle all of the Mercruiser propellers as well if you can let me know which model and size you are neeing. You can add your selected product(s) to your shopping cart and the shipping estimator located at the bottom of the shopping cart page will give you a shipping cost based on your specific postal code. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!
Bravo 1 XR (1.26 Ratio) – Price
Link for Cooling System
http://tinyurl.com/yenmz3x
Regards
Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
[email protected]
www.perfprotech.com
From: Kimmo
Sent: Tuesday, February 01, 2011 6:38 AM
To: PPT – Marine Engines & Parts
Subject: Sales
Hello
Do you sell products to Finland?
If you do then I need a price for Bravo one XR Sport master Drive or
some another suitable drive for my boat and engine
I have following boat and engine
*Boat:*
Searay pachanga22
*Motor*
454 supercharged
Power: 734 hp
Torgue: 960 Nm
Drive gear ratio should be 1.26:1
I need also:
– Fresh water cooling system
– 2 diffrent kind of propellers model cleaver stainless steel
Drive package should include all necessary equipments
Best regards
Kimmo