Zoran,

Actually you have the flat tappet 5.0LX motors Not the 5.7LX. Therefore the correct engines for you would be the GM305LC Open the link below for more engine related details.

Remanufactured 5.0L longblocks (open link to view product details)
http://tinyurl.com/33w89m8

Let me know if you need help getting your order processed.

Regards
Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
[email protected]
www.perfprotech.com

From: Zoran 
Sent: Friday, January 21, 2011 4:20 PM
To: PPT – Marine Engines & Parts
Subject: RE: Product Lead Question: Engine – GM, 5.7L, V8, Stand Rot, Non Tin (#GM350LC)

Hi Andy, thank you for replying.
The boat is Bayliner 3050 Avanti, 1991, has two engines.
I have read the serial number from the top cover on the flame arrestor, the engines are still on my boat and it is difficult or impossible to squeeze and read the code at the back of the engine. This is what I see:
 
Have found your site by Goggle search, searched for “mercruiser engine” Your web site is great, nice details and photos very informative, particularly like the shipping calculator and the ocean freight option.
I hope that you can help me to select good option to repower my boat.
Thanks
Zoran
—–Original Message—–
From: PPT – Marine Engines & Parts [mailto:[email protected]]
Sent: Saturday, 22 January 2011 5:32 a.m.
To:
Subject: RE: Product Lead Question: Engine – GM, 5.7L, V8, Stand Rot, Non Tin (#GM350LC)
Zoran,

Thanks for your inquiry and the opportunity at earning your business. Were you able to verify the engine casting block code on your engine (See link below)? Also please let me know your exact shipping location. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist!

Engine Block Code Location
http://tinyurl.com/2cotqd6
Regards

Performance Product Technologies/IShopBoating
8002 West 6th Street
Stillwater, OK 74074
(405) 533-3812
Fax (775) 257-1769
[email protected]
www.perfprotech.com
From: [email protected] [mailto:[email protected]]
Sent: Thursday, January 20, 2011 7:35 PM
To: PPT – Marine Engines & Parts
Subject: Product Lead Question: Engine – GM, 5.7L, V8, Stand Rot, Non Tin (#GM350LC)

Zoran writes:
Hi, I want to repower my boat which has 2 Mercruiser engines Model MCM 5.0 Litre/LX, Displacement 305CID, Engine rotation LH, Serial Number ODxxxxxx I was thinking to select GM350LC remanufactured engines, but I’m not sure if I’m correct. Can you please advice what would be my best option, I want to transfer the existing parts from the old engines to the new blocks. Second question would be the shipping cost to New Zealand, Auckland. Is the estimate on your web site correct, I’m getting $475 Thanks Zoran
This customer was last viewing the following page:
/engine-gm-57l-v8-stand-rot-non-tin-gm350lc/product/242647

Buy the products and parts you need...