What Equipment is Needed to Winterize My MerCruiser Stern Drive Powered Boat?

TOPIC: Boat/Motor Winterization

QUESTION: I used to own a boat equipped with a Mercury Outboard Motor which made winterization very simple. However I recently purchased a Sea Ray boat that is equipped with a MerCruiser Inboard/Outboard and Alpha Gen 2 Sterndrive. I’m looking to winterize my boat this year for the first time.  Is there a kit available that includes all of the items needed to do this winterization.   

RESPONSE: Below are the parts you need to build our Antifreeze Tank and Pump System. If you have a basic knowledge of 12volt wiring and how to install a simple switch into a circuit you can purchase the components and assemble it yourself.  It is not that difficult to assemble and all of the major components can be purchased from our website.

PARTS LIST:
Tank & Hose- http://tinyurl.com/pph57fb

750 GPH PUMP- http://tinyurl.com/n9mur3n -the pump threads right into the threaded tank cap – cut the excess off after installed

Toggle Switch- http://tinyurl.com/pbcyfdc

Battery Clips- http://tinyurl.com/olalnkz

Fuse Holder- http://tinyurl.com/oha2qrv

5amp ATO/ATC Fuse- http://tinyurl.com/nkcx6pj

Electrical Butt Connectors- http://tinyurl.com/p4y28yx

(2) 16-14 gauge wires [red & black] – Length is determined by if you’re using the battery in the boat [longer] or an auxiliary battery on the ground [shorter] – Obtain Locally

Auxiliary battery or use battery in the boat – Obtain Locally

 

 


Buy the products and parts you need...