PPT - Easy Flush Kit System for 2001 and Later Engines With Single Point Drain (#P1285)

Quickly and easily find the marine parts you are looking for by selecting the manufacturers catalog and searching by part number.

Category Menu

PPT - Easy Flush Kit System for 2001 and Later Engines With Single Point Drain (#P1285)

PRICE: $198.00

Part #: P1285

Quantity:

Add this product to your cart to estimate shipping cost

When it comes to flushing your engine there are several things to keep in mind.

Your engine and sterndrive can easily be flushed without having to run the engine, and without the hassles associated with standard ear muffs.

Even Fresh Water Cooled engines should have the exhaust risers and sterndrive flushed.

There is no need to spend several $100 on elaborate flushing systems. OEM testing has shown that a typical engine can be flushed without running the engine and done so with water introduced through a single inlet point. These test results are supported by patented products.

The portion of the sterndrive that truly requires flushing is the exhaust cavity, not the inlet water passage. The exhaust passage can be flushed without running the engine. Our system is very similar to the OEM system in that it contains a "Checked" quick connect fitting that attaches to any standard garden hose. The included "Y" fitting is inserted into the specified hose, and then connected to the supplied flush fitting which mounts either to the exhaust elbow/riser or remotely in the engine compartment. The water can be turned on before the you are ready to use the system since the quick connect fitting is "checked" and therefore prevents water from flowing, until the fittings are actually connected together. The system will flow fresh water through the heat exchanger and exhaust manifolds/risers before finally exiting as it flushes out the sterndrive.

NOTE: Fits 2000 & newer MCM V-6 & V-8 (305, 350, 377 cid) engines with the single point drain. Mounting bracket in kit will need to be REMOTE MOUNTED on V-6 engines with 1 pc exhaust manifolds or engines with stainless steel exhaust elbows.

NOTE: CANNOT BE USED ON INBOARD MODELS WITH A WATER-LIFT MUFFLER.

Installation Instructions