High Performance Equipment and Marine Parts
Quickly and easily find the marine parts you are looking for by selecting the manufacturers catalog and searching by part number.
The SEI 106 Series sterndrives can be used to replace Mercruiser MC1, MR1 and Alpha Generation 1 sterndrives dating as far back as 1968. All of the Mercruiser Alpha Sterndrives utilize a 17 spline input shaft. The main thing to look for is if the sterndrive being replaced had both Trim and Tilt then the SEI 106 should retrofit for this application. If the sterndrive being replaced had Tilt only and was equipped with the old style shock absorbers, then the SEI sterndrive will not retrofit. Also to note is that the SEI sterndrives have a 13 spline shaft in the lower unit. Therefore if the lower unit of the sterndrive being replaced has a 13 spline shaft then the SEI sterndrive should retrofit without any trouble. The last thing to verify is whether you have the short or long input shaft. Select the following link (opens in a new window) to read more on how to determine this...Short Shaft versus Long Shaft.
Anchor Pins
Anodes
Bearings
Cases & Housings
Gears & Shafts
Lower Housing
Mounting Kits
Seals
U-Joint Assembly and Parts
Upper Housing
Water Pump Kits, MR & Alpha Gen 1
Other
