Mercruiser 3.0L Marine Engine Performance Specifications & Pricing
|
Shop for a New……..3.0L Marine Longblocks |
|
(4 Cyl. Models)
|
Models |
3.0L |
|
Crankshaft Horsepower (SAV1 Rating) |
1351 (1142) |
|
Propshaft Horsepower (SAV1 Rating) |
1011 (852) |
|
Displacement |
181 cid (3.0L) |
|
Maximum rpm @ WOT3 |
4400-4800 rpm |
|
Idle rpm in NEUTRAL3 |
700 rpm |
|
Oil Pressure @ 2000 rpm |
30-60 psi (207-414 kPa) |
|
Min. Oil Pressure @ Idle |
4 psi (28 kPa) |
|
Thermostat |
160°F (71°C) |
|
Timing @ Idle rpm4 |
2°ATDC |
|
Firing Order |
1-3-4-2 |
|
Electrical System |
12-Volt Negative (-) Ground |
|
Alternator Rating – Hot Operating Amps |
65 Amps |
|
Alternator Rating – Cold Operating Amps |
72 Amps |
|
Recommended Battery
Rating |
Minimum 375 cca/475 mca/90 Ah |
1 Power Rated in Accordance with NMMA (National Marine Manufacturers’ Association) rating
procedures.
2 Power Rated in Accordance with SAV1 rating procedures. Horsepower differences shown result
from differences in test rpm, allowable test tolerances, and/or installation of special kit components.
3 Measured using an accurate service tachometer with engine at normal operating temperature.
4 A special procedure must be followed to check or adjust timing. Consult your Authorized Mercury
MerCruiser Dealer before attempting this procedure.