Mercury Marine Engine Break In Procedures - Performance Product Technologies

Quickly and easily find the marine parts you are looking for by selecting the manufacturers catalog and searching by part number.

Blog RSS Link

Marine Engines Repower – Bayliner Cierra 2655, 1991 model Mercruser MCM 5.0l LX
Dennis, Thanks for your inquiry and the opportunity at earning your business. Since Mercruiser made both Alpha and Bravo sterndrive models with that engine I would not be able to tell you without knowing which one your engine is setup for. Can you give me the original engine serial number? Or can you tell me if [...]

4.3L Marine Engine Longblock Performance Specification
Mike, Thanks for your inquiry and the opportunity at earning your business. The Hp rating for longblocks is determined by the fuel system that’s install back onto the engine. For example since GM only produced one marine version of the 4.3L during this timeframe Mercruiser used this same longblock on their 190 Hp 2 barrel carb [...]

Marine Engines – Replacement marine engine for my boat 5.7 mercruiser 1992 #0d763634
Marty, Thanks for your inquiry and the opportunity at earning your business. Using the links below you can review your options. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist! Link to Block Code/Serial Number Location http://www.perfprotech.com/store/app_themes/PPT/images/block-casting-no.jpg Link to Remanufactured Longblocks http://tinyurl.com/68kcet8 Link to Remanufacturing [...]

Suzuki Marine Outboard Motors – Replacing a Fuel Pump on a DF70
Step by Step Video Instructions illustrating how to change an electric fuel pump on a Suzuki DF70 outboard motor. Watch Video

Boat Trailer Parts and Accessories – How to Replace a Boat Trailer Hub
Step by Step video instructions illustrating how to replace a leaky oil filled hub on a boat trailer. Watch Video

MARINE ENGINE BREAK-IN PROCEDURES

“Break-In” Procedures for 4-cycle MerCruiser Engines

IMPORTANT: The first 20-hours of operation will have a dramatic affect relative to overall engine performance and expected engine life. Proper break-in practices reduce the potential for excessive oil consumption. It also helps to achieve better engine performance levels for a longer period of time.

FIRST 20-HOURS:

1. Do NOT operate the engine below 1500 rpm for extended periods of time. Shift into gear as soon as possible after starting the engine. Advance the throttle above 1500 rpm if conditions permit safe operation.

2. Do NOT operate at one continuous speed for extended periods of time. Vary the throttle position every ten to fifteen minutes.

3. Do NOT exceed ¾ throttle during the first 10 hours of operation. During the next 10 hours you may occasionally operate at full throttle for no more than 5-minutes at a time.

4. Do NOT operate at full throttle until the engine reaches normal operating temperatures.

5. Avoid full throttle acceleration from an IDLE speed.

AFTER FIRST 20-HOURS:

To help extend the engine life for a remanufactured MerCruiser engine, consider the following recommendations.

1. Install and maintain the correct propeller for the application. Make sure the prop allows the engine to operate at (or near) the top of its specified Wide-Open-Throttle rpm range. Refer to the Owner’s Manual, or consult with your marine dealer to determine the correct prop for the application.

2. Refrain from extended periods of Wide-Open-Throttle. We recommend cruising at ¾ throttle or below for longer term operation.

3. Change the oil and filter regularly. Refer to Specifications and Maintenance section of the MerCruiser Owners Guide for recommendations

Technical Articles