Marine Engine Variations and Boat Engine Variations - Performance Product Technologies

Quickly and easily find the marine parts you are looking for by selecting the manufacturers catalog and searching by part number.

Blog RSS Link

Marine Engines Repower – Bayliner Cierra 2655, 1991 model Mercruser MCM 5.0l LX
Dennis, Thanks for your inquiry and the opportunity at earning your business. Since Mercruiser made both Alpha and Bravo sterndrive models with that engine I would not be able to tell you without knowing which one your engine is setup for. Can you give me the original engine serial number? Or can you tell me if [...]

4.3L Marine Engine Longblock Performance Specification
Mike, Thanks for your inquiry and the opportunity at earning your business. The Hp rating for longblocks is determined by the fuel system that’s install back onto the engine. For example since GM only produced one marine version of the 4.3L during this timeframe Mercruiser used this same longblock on their 190 Hp 2 barrel carb [...]

Marine Engines – Replacement marine engine for my boat 5.7 mercruiser 1992 #0d763634
Marty, Thanks for your inquiry and the opportunity at earning your business. Using the links below you can review your options. Let me know if you need any further technical information or help placing your order. In either case I will be glad to assist! Link to Block Code/Serial Number Location http://www.perfprotech.com/store/app_themes/PPT/images/block-casting-no.jpg Link to Remanufactured Longblocks http://tinyurl.com/68kcet8 Link to Remanufacturing [...]

Suzuki Marine Outboard Motors – Replacing a Fuel Pump on a DF70
Step by Step Video Instructions illustrating how to change an electric fuel pump on a Suzuki DF70 outboard motor. Watch Video

Boat Trailer Parts and Accessories – How to Replace a Boat Trailer Hub
Step by Step video instructions illustrating how to replace a leaky oil filled hub on a boat trailer. Watch Video

MARINE DRIVE VARIATIONS

Mercruiser Sterndrive

Stern Drive (Inboard/Outboard, Outdrive)
The engine is mounted inside the boat. The transmission/drive unit is outside, attached to the transom. The engine and drive unit are joined by a torque coupler and universal joint. Angling the drive steers the boat.

Mercruiser Inboards

Inboard
The engine and transmission/drive unit are inside the boat. A drive shaft is connected at the rear of the transmission and is run out of the hull through a sealing unit. The propeller is connected directly to the drive shaft at the in-water end. A separate rudder steers the boat.

Mercruiser V Drives

V-Drive
Basically a modified inboard installation. The engine is mounted with the front (pulley end) facing stern (rear). The transmission faces the bow (front) and by the use of a universal joint on the end of the transmission, the drive shaft is directed stern-wards under the engine and through the hull. The propeller/rudder arrangement is the same as in a standard inboard installation.

Jet Drive
The engine is mounted inside the boat and attached to a high speed pump which draws in water through an intake grate, increases its velocity and forces it out through a directionally adjustable nozzle which is mounted outside the boat. Changing the direction of the nozzle steers the boat.

Technical Articles