Mercruiser Big Block 7.4L V8 Marine Engine Product Specifications
(7.4L V-8 Models)
Buy Big Block V8 Marine Engines Online……Shop Now
Mercruiser 7.4L & 8.2L Big Block V8 Marine Engine Parts Lookup Diagrams……Search Here
|
Models |
7.4L MPI |
454 Mag MPI |
|
Propshaft Horsepower (SAV1 Rating) |
3101 (2752) |
3851 |
|
Propshaft Kilowatts (SAV1 Rating) |
2311 |
2871 |
|
Displacement |
454 cid (7.4 l) |
|
|
Maximum rpm @ WOT3 |
4200-4600 rpm |
4600-5000 rpm |
|
Idle rpm in NEUTRAL3 |
600 rpm6 |
|
|
Oil Pressure @ 2000 rpm |
30-70 psi (207-483 kPa) |
|
|
Min. Oil Pressure @ Idle |
4 psi (28 kPa) |
|
|
Thermostat |
160° F (71° C) |
|
|
Timing @ Idle rpm4 |
8° BTDC |
|
|
Firing Order |
1-8-4-3-6-5-7-2 |
|
|
Electrical System |
12-Volt Negative (-) Ground |
|
|
Alternator Rating – Cold Operating Amps |
65 Amps |
|
|
Alternator Rating – Hot Operating Amps |
72 Amps |
|
|
Recommended Battery Rating |
Minimum 650 cca/825mca/150 Ah |
|
1 Power Rated in Accordance with NMMA (National Marine Manufacturers’ Association) rating procedures.
2 Power Rated in Accordance with SAV1 rating procedures. Horsepower differences shown result from differences in test rpm, allowable test tolerances, and/or installation of special kit components.
3 Measure using an accurate service tachometer with engine at normal operating temperature.
4 A special procedure must be followed to check or adjust timing. Consult your Authorized Mercury MerCruiser Dealer before attempting this procedure.
6 Idle speed on EFI models is not adjustable.
